The original paper is in English. Non-English content has been machine-translated and may contain typographical errors or mistranslations. ex. Some numerals are expressed as "XNUMX".
Copyrights notice
The original paper is in English. Non-English content has been machine-translated and may contain typographical errors or mistranslations. Copyrights notice
Surat ini melaporkan antena tampalan jalur mikro (ETMP) segi tiga sama sisi Ka-band berprestasi tinggi yang digantung pada membran dielektrik nipis. Membran dilepaskan menggunakan teknik penjilidan mikro pukal silikon. Satu set ungkapan bentuk tertutup untuk mengira frekuensi resonan antena yang dicadangkan pada substrat mikromesin turut dibentangkan. Prestasi yang diukur bagi struktur antena disahkan menggunakan kaedah unsur terhingga (FEM) berasaskan Agilent High Frequency Structure Simulator (versi 5.5). Antena yang direka mempamerkan lebar jalur kehilangan pulangan -10 dB yang luas sebanyak 1.2 GHz pada 35.4 GHz. Tahap polarisasi silang antena yang diukur adalah kurang daripada -15 dB dalam kedua-dua satah E dan H.
The copyright of the original papers published on this site belongs to IEICE. Unauthorized use of the original or translated papers is prohibited. See IEICE Provisions on Copyright for details.
Salinan
Preeti SHARMA, Shiban K. KOUL, Sudhir CHANDRA, "Ka-Band Triangular Patch Antenna on Micromachined High-k Substrate" in IEICE TRANSACTIONS on Communications,
vol. E91-B, no. 6, pp. 2073-2076, June 2008, doi: 10.1093/ietcom/e91-b.6.2073.
Abstract: This letter reports a high-performance Ka-band equilateral triangular microstrip patch (ETMP) antenna suspended on a thin dielectric membrane. The membrane is released using a silicon bulk-micromachining technique. A set of closed-form expressions to calculate the resonant frequency of the proposed antenna on the micromachined substrate is also presented. The measured performance of the antenna structure is verified using the finite element method (FEM) based Agilent High Frequency Structure Simulator (version 5.5). The fabricated antenna exhibited a wide -10 dB return loss bandwidth of 1.2 GHz at 35.4 GHz. The measured antenna cross-polarization level is less than -15 dB in both the E- and H-planes.
URL: https://global.ieice.org/en_transactions/communications/10.1093/ietcom/e91-b.6.2073/_p
Salinan
@ARTICLE{e91-b_6_2073,
author={Preeti SHARMA, Shiban K. KOUL, Sudhir CHANDRA, },
journal={IEICE TRANSACTIONS on Communications},
title={Ka-Band Triangular Patch Antenna on Micromachined High-k Substrate},
year={2008},
volume={E91-B},
number={6},
pages={2073-2076},
abstract={This letter reports a high-performance Ka-band equilateral triangular microstrip patch (ETMP) antenna suspended on a thin dielectric membrane. The membrane is released using a silicon bulk-micromachining technique. A set of closed-form expressions to calculate the resonant frequency of the proposed antenna on the micromachined substrate is also presented. The measured performance of the antenna structure is verified using the finite element method (FEM) based Agilent High Frequency Structure Simulator (version 5.5). The fabricated antenna exhibited a wide -10 dB return loss bandwidth of 1.2 GHz at 35.4 GHz. The measured antenna cross-polarization level is less than -15 dB in both the E- and H-planes.},
keywords={},
doi={10.1093/ietcom/e91-b.6.2073},
ISSN={1745-1345},
month={June},}
Salinan
TY - JOUR
TI - Ka-Band Triangular Patch Antenna on Micromachined High-k Substrate
T2 - IEICE TRANSACTIONS on Communications
SP - 2073
EP - 2076
AU - Preeti SHARMA
AU - Shiban K. KOUL
AU - Sudhir CHANDRA
PY - 2008
DO - 10.1093/ietcom/e91-b.6.2073
JO - IEICE TRANSACTIONS on Communications
SN - 1745-1345
VL - E91-B
IS - 6
JA - IEICE TRANSACTIONS on Communications
Y1 - June 2008
AB - This letter reports a high-performance Ka-band equilateral triangular microstrip patch (ETMP) antenna suspended on a thin dielectric membrane. The membrane is released using a silicon bulk-micromachining technique. A set of closed-form expressions to calculate the resonant frequency of the proposed antenna on the micromachined substrate is also presented. The measured performance of the antenna structure is verified using the finite element method (FEM) based Agilent High Frequency Structure Simulator (version 5.5). The fabricated antenna exhibited a wide -10 dB return loss bandwidth of 1.2 GHz at 35.4 GHz. The measured antenna cross-polarization level is less than -15 dB in both the E- and H-planes.
ER -