The original paper is in English. Non-English content has been machine-translated and may contain typographical errors or mistranslations. ex. Some numerals are expressed as "XNUMX".
Copyrights notice
The original paper is in English. Non-English content has been machine-translated and may contain typographical errors or mistranslations. Copyrights notice
Kajian ini bertujuan untuk mencadangkan antena tatasusunan jalur mikro bersiri-gelombang kembara yang baru dan reka bentuknya. Antena yang dicadangkan mempunyai dua ciri: celah tambahan yang diletakkan pada bahagian keluaran elemen antena diperkenalkan sebagai tahap kebebasan baharu untuk mengawal kuasa sinaran daripada setiap elemen. Juga, jarak elemen yang tidak sama digunakan untuk mengimbangi fasa lulus setiap elemen antena; garisan berliku yang akan meningkatkan kehilangan sisipan tidak digunakan. Tatasusunan linear 9 elemen direka dan diuji, dan hasil simulasi dan diukur bersetuju, sekali gus mengesahkan reka bentuk yang dicadangkan.
Jun GOTO
Mitsubishi Electric Corporation
Makoto MATSUKI
Mitsubishi Electric Corporation
Takashi MARUYAMA
Mitsubishi Electric Corporation
Toru FUKASAWA
Mitsubishi Electric Corporation
Naofumi YONEDA
Mitsubishi Electric Corporation
Jiro HIROKAWA
Tokyo Institute of Technology
The copyright of the original papers published on this site belongs to IEICE. Unauthorized use of the original or translated papers is prohibited. See IEICE Provisions on Copyright for details.
Salinan
Jun GOTO, Makoto MATSUKI, Takashi MARUYAMA, Toru FUKASAWA, Naofumi YONEDA, Jiro HIROKAWA, "Design of the Traveling-Wave Series-Fed Microstrip Antenna Array with Power Control Slits of Unequal Inter-Element Spacing" in IEICE TRANSACTIONS on Communications,
vol. E104-B, no. 6, pp. 624-629, June 2021, doi: 10.1587/transcom.2020EBP3089.
Abstract: This study aims to propose a novel traveling-wave series-fed microstrip array antenna and its design. The proposed antenna has two features: additional slits placed on the output side of the antenna element are introduced as a new degree of freedom to control the radiation power from each element. Also, the unequal element spacing is applied to compensate passing phases of each antenna element; meander lines that would increase the insertion loss are not used. A 9-element linear array is designed and tested, and the simulated and measured results agree, thus validating the proposed design.
URL: https://global.ieice.org/en_transactions/communications/10.1587/transcom.2020EBP3089/_p
Salinan
@ARTICLE{e104-b_6_624,
author={Jun GOTO, Makoto MATSUKI, Takashi MARUYAMA, Toru FUKASAWA, Naofumi YONEDA, Jiro HIROKAWA, },
journal={IEICE TRANSACTIONS on Communications},
title={Design of the Traveling-Wave Series-Fed Microstrip Antenna Array with Power Control Slits of Unequal Inter-Element Spacing},
year={2021},
volume={E104-B},
number={6},
pages={624-629},
abstract={This study aims to propose a novel traveling-wave series-fed microstrip array antenna and its design. The proposed antenna has two features: additional slits placed on the output side of the antenna element are introduced as a new degree of freedom to control the radiation power from each element. Also, the unequal element spacing is applied to compensate passing phases of each antenna element; meander lines that would increase the insertion loss are not used. A 9-element linear array is designed and tested, and the simulated and measured results agree, thus validating the proposed design.},
keywords={},
doi={10.1587/transcom.2020EBP3089},
ISSN={1745-1345},
month={June},}
Salinan
TY - JOUR
TI - Design of the Traveling-Wave Series-Fed Microstrip Antenna Array with Power Control Slits of Unequal Inter-Element Spacing
T2 - IEICE TRANSACTIONS on Communications
SP - 624
EP - 629
AU - Jun GOTO
AU - Makoto MATSUKI
AU - Takashi MARUYAMA
AU - Toru FUKASAWA
AU - Naofumi YONEDA
AU - Jiro HIROKAWA
PY - 2021
DO - 10.1587/transcom.2020EBP3089
JO - IEICE TRANSACTIONS on Communications
SN - 1745-1345
VL - E104-B
IS - 6
JA - IEICE TRANSACTIONS on Communications
Y1 - June 2021
AB - This study aims to propose a novel traveling-wave series-fed microstrip array antenna and its design. The proposed antenna has two features: additional slits placed on the output side of the antenna element are introduced as a new degree of freedom to control the radiation power from each element. Also, the unequal element spacing is applied to compensate passing phases of each antenna element; meander lines that would increase the insertion loss are not used. A 9-element linear array is designed and tested, and the simulated and measured results agree, thus validating the proposed design.
ER -