The original paper is in English. Non-English content has been machine-translated and may contain typographical errors or mistranslations. ex. Some numerals are expressed as "XNUMX".
Copyrights notice
The original paper is in English. Non-English content has been machine-translated and may contain typographical errors or mistranslations. Copyrights notice
Hasil simulasi dan fabrikasi pada tatasusunan fotodiod (PD) 4 saluran bercahaya belakang dengan kanta bola mikro yang dijajarkan sendiri diterangkan. Pic saluran dan diameter setiap kawasan fotosensitif ialah 250 µm dan 40 µm, masing-masing. Arus foto yang diukur adalah 1.92 kali lebih besar daripada itu tanpa kanta. Toleransi penjajaran antara paksi optik gentian mod tunggal (SMF) dan fotodiod dipertingkatkan daripada 21.2 µm kepada 42.7 µm. Selain itu, toleransi pemisahan antara gentian dan kanta ialah 210.5 µm. Toleransi besar ini bersetuju dengan hasil simulasi, menunjukkan bahawa konfigurasi peranti sesuai untuk penerima untuk sambungan antara berbilang saluran. Tindak balas kekerapan dan perbincangan silang antara saluran juga dibincangkan.
The copyright of the original papers published on this site belongs to IEICE. Unauthorized use of the original or translated papers is prohibited. See IEICE Provisions on Copyright for details.
Salinan
Kazuhiro NISHIDE, Kenji IKEDA, Xueliang SONG, Shurong WANG, Yoshiaki NAKANO, "Highly-Permissible Alignment Tolerance of Back-Illuminated Photo-Diode Array Attached with a Self-Aligned Micro Ball Lens" in IEICE TRANSACTIONS on Electronics,
vol. E91-C, no. 9, pp. 1472-1479, September 2008, doi: 10.1093/ietele/e91-c.9.1472.
Abstract: Simulation and fabrication results on back-illuminated 4-channel photodiode (PD) array with a self-aligned micro ball lens are described. The channel pitch and diameter of each photosensitive area are 250 µm and 40 µm, respectively. Measured photocurrent is 1.92 times larger than that without a lens. Alignment tolerance between the single mode fiber (SMF) optical axis and the photodiode is improved from 21.2 µm to 42.7 µm. Moreover, the separation tolerance between the fiber and the lens is 210.5 µm. These large tolerances agree with simulation results, demonstrating that the device configuration is suitable for receivers for multi-channel inter-connection. Frequency response and inter-channel cross talk are also discussed.
URL: https://global.ieice.org/en_transactions/electronics/10.1093/ietele/e91-c.9.1472/_p
Salinan
@ARTICLE{e91-c_9_1472,
author={Kazuhiro NISHIDE, Kenji IKEDA, Xueliang SONG, Shurong WANG, Yoshiaki NAKANO, },
journal={IEICE TRANSACTIONS on Electronics},
title={Highly-Permissible Alignment Tolerance of Back-Illuminated Photo-Diode Array Attached with a Self-Aligned Micro Ball Lens},
year={2008},
volume={E91-C},
number={9},
pages={1472-1479},
abstract={Simulation and fabrication results on back-illuminated 4-channel photodiode (PD) array with a self-aligned micro ball lens are described. The channel pitch and diameter of each photosensitive area are 250 µm and 40 µm, respectively. Measured photocurrent is 1.92 times larger than that without a lens. Alignment tolerance between the single mode fiber (SMF) optical axis and the photodiode is improved from 21.2 µm to 42.7 µm. Moreover, the separation tolerance between the fiber and the lens is 210.5 µm. These large tolerances agree with simulation results, demonstrating that the device configuration is suitable for receivers for multi-channel inter-connection. Frequency response and inter-channel cross talk are also discussed.},
keywords={},
doi={10.1093/ietele/e91-c.9.1472},
ISSN={1745-1353},
month={September},}
Salinan
TY - JOUR
TI - Highly-Permissible Alignment Tolerance of Back-Illuminated Photo-Diode Array Attached with a Self-Aligned Micro Ball Lens
T2 - IEICE TRANSACTIONS on Electronics
SP - 1472
EP - 1479
AU - Kazuhiro NISHIDE
AU - Kenji IKEDA
AU - Xueliang SONG
AU - Shurong WANG
AU - Yoshiaki NAKANO
PY - 2008
DO - 10.1093/ietele/e91-c.9.1472
JO - IEICE TRANSACTIONS on Electronics
SN - 1745-1353
VL - E91-C
IS - 9
JA - IEICE TRANSACTIONS on Electronics
Y1 - September 2008
AB - Simulation and fabrication results on back-illuminated 4-channel photodiode (PD) array with a self-aligned micro ball lens are described. The channel pitch and diameter of each photosensitive area are 250 µm and 40 µm, respectively. Measured photocurrent is 1.92 times larger than that without a lens. Alignment tolerance between the single mode fiber (SMF) optical axis and the photodiode is improved from 21.2 µm to 42.7 µm. Moreover, the separation tolerance between the fiber and the lens is 210.5 µm. These large tolerances agree with simulation results, demonstrating that the device configuration is suitable for receivers for multi-channel inter-connection. Frequency response and inter-channel cross talk are also discussed.
ER -