The original paper is in English. Non-English content has been machine-translated and may contain typographical errors or mistranslations. ex. Some numerals are expressed as "XNUMX".
Copyrights notice
The original paper is in English. Non-English content has been machine-translated and may contain typographical errors or mistranslations. Copyrights notice
Penampan sel optik (OCB) untuk digunakan dalam suis ATM fotonik, diperlukan untuk menyelesaikan perbalahan antara sel optik. Sistem suis 320-Gb/s-throughput dengan 32 saluran panjang gelombang memerlukan saiz penampan 13 dan lebar jalur panjang gelombang 25 nm. Kami membangunkan penimbal sel optik dengan konfigurasi pili empat bersarang dan mengarangnya dengan gerbang penyerapan elektro dan memperoleh penguat optik yang diapit. Variasi aras keluaran, yang menentukan kestabilan keadaan operasi, adalah kurang daripada 2.4 dB dalam keadaan biasa dan variasi kehilangan sisipan ditindas kepada dalam 5 dB. OCB ini boleh digunakan dalam suis ATM fotonik 320-Gb/s.
The copyright of the original papers published on this site belongs to IEICE. Unauthorized use of the original or translated papers is prohibited. See IEICE Provisions on Copyright for details.
Salinan
Shigeki KITAJIMA, Hideaki TAKANO, Masahiko KOBAYASHI, "Traveling Type Optical Cell Buffer with Small Variation of Output Cell Level" in IEICE TRANSACTIONS on Electronics,
vol. E82-C, no. 2, pp. 229-235, February 1999, doi: .
Abstract: An optical cell buffer (OCB) for use in photonic ATM switch, is needed in order to resolve contention between optical cells. A 320-Gb/s-throughput switch system with 32 wavelength channels requires a buffer size of 13 and a wavelength bandwidth of 25 nm. We developed an optical cell buffer with a four-nested-taps configuration and fabricated it with electroabsorption gates and gain clamped optical amplifiers. The output level variation, which determines the stability of operating condition, is less than 2.4 dB under typical conditions and the insertion loss variation is suppressed to within 5 dB. This OCB can be used in a 320-Gb/s photonic ATM switch.
URL: https://global.ieice.org/en_transactions/electronics/10.1587/e82-c_2_229/_p
Salinan
@ARTICLE{e82-c_2_229,
author={Shigeki KITAJIMA, Hideaki TAKANO, Masahiko KOBAYASHI, },
journal={IEICE TRANSACTIONS on Electronics},
title={Traveling Type Optical Cell Buffer with Small Variation of Output Cell Level},
year={1999},
volume={E82-C},
number={2},
pages={229-235},
abstract={An optical cell buffer (OCB) for use in photonic ATM switch, is needed in order to resolve contention between optical cells. A 320-Gb/s-throughput switch system with 32 wavelength channels requires a buffer size of 13 and a wavelength bandwidth of 25 nm. We developed an optical cell buffer with a four-nested-taps configuration and fabricated it with electroabsorption gates and gain clamped optical amplifiers. The output level variation, which determines the stability of operating condition, is less than 2.4 dB under typical conditions and the insertion loss variation is suppressed to within 5 dB. This OCB can be used in a 320-Gb/s photonic ATM switch.},
keywords={},
doi={},
ISSN={},
month={February},}
Salinan
TY - JOUR
TI - Traveling Type Optical Cell Buffer with Small Variation of Output Cell Level
T2 - IEICE TRANSACTIONS on Electronics
SP - 229
EP - 235
AU - Shigeki KITAJIMA
AU - Hideaki TAKANO
AU - Masahiko KOBAYASHI
PY - 1999
DO -
JO - IEICE TRANSACTIONS on Electronics
SN -
VL - E82-C
IS - 2
JA - IEICE TRANSACTIONS on Electronics
Y1 - February 1999
AB - An optical cell buffer (OCB) for use in photonic ATM switch, is needed in order to resolve contention between optical cells. A 320-Gb/s-throughput switch system with 32 wavelength channels requires a buffer size of 13 and a wavelength bandwidth of 25 nm. We developed an optical cell buffer with a four-nested-taps configuration and fabricated it with electroabsorption gates and gain clamped optical amplifiers. The output level variation, which determines the stability of operating condition, is less than 2.4 dB under typical conditions and the insertion loss variation is suppressed to within 5 dB. This OCB can be used in a 320-Gb/s photonic ATM switch.
ER -