The original paper is in English. Non-English content has been machine-translated and may contain typographical errors or mistranslations. ex. Some numerals are expressed as "XNUMX".
Copyrights notice
The original paper is in English. Non-English content has been machine-translated and may contain typographical errors or mistranslations. Copyrights notice
Kami berjaya membuat ferrules plastik dan lengan penjajaran belah untuk penyambung gentian optik mod tunggal melalui proses pengacuan suntikan. Polimer kristal cecair (LCP) digunakan sebagai bahan pengacuan untuk ferrule. Kami memperkenalkan mekanisme kawalan kesipian ke dalam acuan ferrule dan menyedari kesipian kurang daripada 1 µm. Sebagai bahan acuan untuk lengan, resin epoksi termoset digunakan. Sifat mekanikal yang sesuai telah direalisasikan dengan menggunakan reka bentuk dimensi yang sesuai dan proses pengacuan. Ciri optik sistem yang menggabungkan komponen plastik ini serasi dengan penyambung jenis SC mod tunggal dan juga stabil dalam keadaan panas dan lembap.
The copyright of the original papers published on this site belongs to IEICE. Unauthorized use of the original or translated papers is prohibited. See IEICE Provisions on Copyright for details.
Salinan
Hirotsugu SATO, Shuichi YANAGI, Yoshito SHUTO, Masayoshi OHNO, Shun-ichi TOHNO, "Injection Molded Fiber-Optic Connector Components for Single-Mode Fiber Applications" in IEICE TRANSACTIONS on Electronics,
vol. E82-C, no. 8, pp. 1578-1583, August 1999, doi: .
Abstract: We successfully fabricated plastic ferrules and split alignment sleeves for single-mode fiber-optic connectors by the injection molding process. Liquid crystalline polymer (LCP) was used as the molding material for the ferrule. We introduced an eccentricity control mechanism into the ferrule mold and realized an eccentricity of less than 1 µm. As the molding material for the sleeve, thermosetting epoxy resin was used. Suitable mechanical properties were realized by employing appropriate dimensional design and the molding process. The optical characteristics of a system combining these plastic components are compatible with single-mode SC-type connectors and are also stable under hot and humid conditions.
URL: https://global.ieice.org/en_transactions/electronics/10.1587/e82-c_8_1578/_p
Salinan
@ARTICLE{e82-c_8_1578,
author={Hirotsugu SATO, Shuichi YANAGI, Yoshito SHUTO, Masayoshi OHNO, Shun-ichi TOHNO, },
journal={IEICE TRANSACTIONS on Electronics},
title={Injection Molded Fiber-Optic Connector Components for Single-Mode Fiber Applications},
year={1999},
volume={E82-C},
number={8},
pages={1578-1583},
abstract={We successfully fabricated plastic ferrules and split alignment sleeves for single-mode fiber-optic connectors by the injection molding process. Liquid crystalline polymer (LCP) was used as the molding material for the ferrule. We introduced an eccentricity control mechanism into the ferrule mold and realized an eccentricity of less than 1 µm. As the molding material for the sleeve, thermosetting epoxy resin was used. Suitable mechanical properties were realized by employing appropriate dimensional design and the molding process. The optical characteristics of a system combining these plastic components are compatible with single-mode SC-type connectors and are also stable under hot and humid conditions.},
keywords={},
doi={},
ISSN={},
month={August},}
Salinan
TY - JOUR
TI - Injection Molded Fiber-Optic Connector Components for Single-Mode Fiber Applications
T2 - IEICE TRANSACTIONS on Electronics
SP - 1578
EP - 1583
AU - Hirotsugu SATO
AU - Shuichi YANAGI
AU - Yoshito SHUTO
AU - Masayoshi OHNO
AU - Shun-ichi TOHNO
PY - 1999
DO -
JO - IEICE TRANSACTIONS on Electronics
SN -
VL - E82-C
IS - 8
JA - IEICE TRANSACTIONS on Electronics
Y1 - August 1999
AB - We successfully fabricated plastic ferrules and split alignment sleeves for single-mode fiber-optic connectors by the injection molding process. Liquid crystalline polymer (LCP) was used as the molding material for the ferrule. We introduced an eccentricity control mechanism into the ferrule mold and realized an eccentricity of less than 1 µm. As the molding material for the sleeve, thermosetting epoxy resin was used. Suitable mechanical properties were realized by employing appropriate dimensional design and the molding process. The optical characteristics of a system combining these plastic components are compatible with single-mode SC-type connectors and are also stable under hot and humid conditions.
ER -