The original paper is in English. Non-English content has been machine-translated and may contain typographical errors or mistranslations. ex. Some numerals are expressed as "XNUMX".
Copyrights notice
The original paper is in English. Non-English content has been machine-translated and may contain typographical errors or mistranslations. Copyrights notice
Dengan menggabungkan teknologi penyerap boleh tepu semua optik dan optik difraksi, satu skema modul penyahmultipleksan pembahagian masa semua optik disiasat. Berikutan cadangan pengarang, reka bentuk, fabrikasi ujian platform optik dalam kertas sebelumnya, kertas kerja ini memfokuskan pada pencirian prestasi pensuisan. Menggunakan berbilang penyerap telaga kuantum bagi komposisi InGaAs/InAlAs, dan memperoleh denyutan laser semikonduktor tersuis dengan lebar nadi 25 ps, fungsi pensuisan ditunjukkan secara eksperimen pada panjang gelombang 1.55 µm. Nisbah hidup-mati pensuisan dibandingkan antara 4 konfigurasi kanta, 2 konfigurasi kanta (2L) dan ruang kosong, geometri kolinear. Tiada degradasi diperhatikan dalam kes konfigurasi 2 kanta berbanding dengan pencahayaan kolinear. Oleh itu kebolehlaksanaan modul suis semua optik dengan kecekapan kuasa dan kelajuan tinggi diramalkan, di bawah andaian kemajuan dalam litografi sub-mikron.
The copyright of the original papers published on this site belongs to IEICE. Unauthorized use of the original or translated papers is prohibited. See IEICE Provisions on Copyright for details.
Salinan
Rainer HAINBERGER, Yuki KOMAI, Yasuyuki OZEKI, Masahiro TSUCHIYA, Kashiko KODATE, Takeshi KAMIYA, "Experimental Studies of Switching Characteristics for All-Optical Demultiplexer Module" in IEICE TRANSACTIONS on Electronics,
vol. E84-C, no. 3, pp. 358-363, March 2001, doi: .
Abstract: By combining the technology of all-optical saturable absorbers and the diffractive optics, a scheme of all-optical time division demultiplexing module is investigated. Following authors' proposal, design, test fabrication of the optical platform in the previous paper, this paper focuses on the characterization of switching performance. Using a multiple quantum well saturable absorber of InGaAs/InAlAs composition, and gain switched semiconductor laser pulses of 25 ps pulse width, the switching function was demonstrated experimentally at wavelength of 1.55 µm. The switching on-off ratio was compared among 4 lens configuration, 2 lens configuration (2L) and free space, collinear geometry. No degradation was observed in the case of 2 lens configuration in comparison to collinear illumination. Thus the feasibility of all-optical switch module with power efficiency and high speed is predicted, under the assumption of the progress in sub-micron lithography.
URL: https://global.ieice.org/en_transactions/electronics/10.1587/e84-c_3_358/_p
Salinan
@ARTICLE{e84-c_3_358,
author={Rainer HAINBERGER, Yuki KOMAI, Yasuyuki OZEKI, Masahiro TSUCHIYA, Kashiko KODATE, Takeshi KAMIYA, },
journal={IEICE TRANSACTIONS on Electronics},
title={Experimental Studies of Switching Characteristics for All-Optical Demultiplexer Module},
year={2001},
volume={E84-C},
number={3},
pages={358-363},
abstract={By combining the technology of all-optical saturable absorbers and the diffractive optics, a scheme of all-optical time division demultiplexing module is investigated. Following authors' proposal, design, test fabrication of the optical platform in the previous paper, this paper focuses on the characterization of switching performance. Using a multiple quantum well saturable absorber of InGaAs/InAlAs composition, and gain switched semiconductor laser pulses of 25 ps pulse width, the switching function was demonstrated experimentally at wavelength of 1.55 µm. The switching on-off ratio was compared among 4 lens configuration, 2 lens configuration (2L) and free space, collinear geometry. No degradation was observed in the case of 2 lens configuration in comparison to collinear illumination. Thus the feasibility of all-optical switch module with power efficiency and high speed is predicted, under the assumption of the progress in sub-micron lithography.},
keywords={},
doi={},
ISSN={},
month={March},}
Salinan
TY - JOUR
TI - Experimental Studies of Switching Characteristics for All-Optical Demultiplexer Module
T2 - IEICE TRANSACTIONS on Electronics
SP - 358
EP - 363
AU - Rainer HAINBERGER
AU - Yuki KOMAI
AU - Yasuyuki OZEKI
AU - Masahiro TSUCHIYA
AU - Kashiko KODATE
AU - Takeshi KAMIYA
PY - 2001
DO -
JO - IEICE TRANSACTIONS on Electronics
SN -
VL - E84-C
IS - 3
JA - IEICE TRANSACTIONS on Electronics
Y1 - March 2001
AB - By combining the technology of all-optical saturable absorbers and the diffractive optics, a scheme of all-optical time division demultiplexing module is investigated. Following authors' proposal, design, test fabrication of the optical platform in the previous paper, this paper focuses on the characterization of switching performance. Using a multiple quantum well saturable absorber of InGaAs/InAlAs composition, and gain switched semiconductor laser pulses of 25 ps pulse width, the switching function was demonstrated experimentally at wavelength of 1.55 µm. The switching on-off ratio was compared among 4 lens configuration, 2 lens configuration (2L) and free space, collinear geometry. No degradation was observed in the case of 2 lens configuration in comparison to collinear illumination. Thus the feasibility of all-optical switch module with power efficiency and high speed is predicted, under the assumption of the progress in sub-micron lithography.
ER -